bearing packaging machine 1

bearing packaging machine

This is a type of coil packaging machine for bearing packaging.

Products for wrapping: Bearings

Operations: Packing bearings with wrapping polyethylene

The size for products

Products Size	Outer Diameter (mm)	Inner Diameter (mm)	Width (mm)	Mass (kg)
Min	250	120	33	7
Max	910	800	290	280

Packing material:

·         First layer:     Low-density polyethylene with a thickness of  0,045 mm and width of 120 mm

·         Second layer:       Low-density polyethylene striated with a thickness of  0,11 … 0,15 mm and width of 50 mm

Note: widths polyethylene can be modified

Overlap polyethylene 30%-50%.

Daily production:

·         5-15 types of bearings

·         1-100 pcs. for each type bearings

The machine must be easily and quickly adjusted from one type bearing to another type.

Loading system (loading and unloading bearing):

·         Manual or

·         Automatical (with conveyor line)

Electricity:                                380V±5% ;  50Hz.

Compressed air system:                 5 bar available

Direction of security and environment: C.E. - directions

Spare parts:                             2 years – perishable parts

Guaranty:                                2 years

coil packaging machine line

coil packaging line

It including: Coil tilter, coil upender, turnstile, wrapping machine, coil stacking machine, Palletizer

The idea of packaging solution  ideal is definitely an the thought of essential part of the coil packing machinery. The machine addresses tight tiers of packing supplies total areas through the coil. This restricted tiers of packing substance removes a lot of the air in the package deal. Covered protective packing material, the opportunity of moisture to create is reduced, therefore reducing the potential of corrosion or water spots, by reduction of the quantity of air within the package.

The ancillary packing is does apply too. This packaging can include suppressors of outdoors size, suppressors of within size , suppressors of side wall structure or belly cover materials. These components might be constructed-into the machine to get utilized quickly or applied manually . This ancillary packaging safety measures each coil as well as the reduced covering of film The ancillary item can be accomplished from plastic materials to keep an entirely recyclable bundle.
One more layer of packing supplies are then applied with respect requirement. The 2nd layer of packing materials can handle the ancillary bundle constantly in place and a lot more safeguards the inside airtight layer of film. The top will be torn from handling problems. Aside from the inner coating continues to be undamaged and therefore the coil stays guarded and sealed, because of the ancillary components are among that is used individually from the two levels,

coil packaging machine 1

Coil packaging machine

Ensure value：

a)Diamond ring speed： 40-80r/min

b)Wrapping effect： Merchandise area is smooth and also.
Functioning several hours in the machine
Efficient operating hour per year：7200h。
Environment protection
Noises control over the machine environment： Meet up with the national specifications for noise control.

Emission regular

Emission in the squander gas and waste normal water meet up with nationwide requirements.
Scope of provide

1. Source list：

No.Itemsamount

1Primary motor of the equipment1 set for every

2Material framework1set for each and every

3Electrical cupboard, guardrail etc.1set for each

1year warrantee:

a. suppling the spare parts of machien for free.

b. If need,it's able to sent the engineer for checking the machine.

c. Altering the broken a part of electric components for free.

d. dealing and Responding using the trouble of machine in 3hour following receiviong the requirment.

e. A new machine will be sent as a replacement,if the machine don't work after servicing.

master coil wrapper

master coil wrapper

IV .Technical Parameter

Model	Coil master
Coil width	700 ~ 1778mm
Coil OD	1100 ~ 2200mm
Coil ID	>457mmm
Coil weight	1000-26000kg
Packing material	PE/LLDPE stretch film/PVC ID:76mm   OD:100-250mm    Width:250mm
Shutter speed	app.2-3m/sec
Overlap rate	20% ~ 90%
Power output	app 23KW
Power voltage	480V, 3 phase, 60 Hz
Air supply	6~8kgf /cm2

V. Machine Installation

1. This automatic coil packing machine system is composed of blocker roller stations,

guide rail, main machine, trolley, hydraulic system, shuttle, packing material release & storage station, U-type orbital, automatic mechanical hand, signal detection system, electric circuit system, electric cabinet and etc.

2. The machine shall be mounted in dry and dust free environment.

3. The machine shall be mounted on flat and hard ground, where the ground

load should be more than 10t/ m².

4.     Power supply should be in accord with states in the nameplate of the

machine.

5.     Only trained personnel can be allowed to enter the installation site.

6.     The entire installation shall be done under the power supply is cut off.

7.     As the machine has been transported and moved, all flexible components

shall be inspected carefully.

8.     Install the guide rail as the design drawing on the ground horizontally,

then place trolley on guide rail to make sure the trolley can moved smoothly.

9.     Put main engine/machine in the trolley, machine should be perpendicular

to the trolley.

10.  Install the U-type orbital and shuttle as the design drawing.

11.  Install the hydraulic station and relevant pipelines.

12.  Place three blocker roller stations, electric wire trunking, signal

detection coil packaging machine system in correct positions according to the drawing.

13.  Connect and check electric circuit system well as the electric diagram.

14.  Connect the power supply after installation complete.

15.  Move the main coil packaging machine to three blocker roller stations in separate

in “Manual” mode and check their signals.

16.  Calibrate the three blocker roller stations according to the stop positions

of the main engine/machine.

17.  Operate each operation in “Manual” mode. After confirming there is no

problem, operating them again in “Auto” mode.

Find the right coil packaging machine for steel coil

Technical parameter coil packaging machine:
Object weight: 250-2200kg

Package width: 150-350mm

Package OD: 1200-2200mm

Package ID:1000-1600mm

OD-ID<600mm

Roller Speed: 2-4m/min

Rotating speed: 20-100r/min

Overlap scope: 20%-90%

Power output: app. 4.0kw

Power voltage: 200v/60Hz

Packing material: LLDPE/PVC film

ID:50mm  OD:80-150mm  Width:120mm

              Paper/PP/HDPE

ID:55mm  OD:100-400mm  Width:120mm

List of Main parts

Description	Brand
Frequency Converters	Mitsubishi
Motor	Mitsubishi
Sensor	Autonics
Switch	Omron
Contactor	Omron

List of Spare Parts (free)

Small friction wheel	4Pcs		Factory standard
Tape storing wheel	4pcs		Factory standard
Fuse	4pcs		Standard
Air connector	6pcs		Standard
Bearing	2pcs		Standard
Packing Material	10Kg
Tools box	1 set